Installation and construction method of stone panel

The installation construction method of stone material decoration panel generally has hang paste "and paste" two kinds. Usually, the stone panel with the paste method is a small panel with a small size (the length is 40CM and below) and the installation height is about 1000MM. The big stone panel should adopt the method of mounting.

The method of hanging paste is divided into wet and dry work.

1. Wet work stone wall construction practice

(1) the construction of the stone wall with traditional wet method

(2) to improve the traditional installation process wall structure: the improved process saves steel mesh piece for fittings, and the use of galvanized or stainless steel anchor and anchor at the grass-roots level, China plastic particles network and then to the parting of stratified into 1:2 cement mortar (volume ratio).

The commonly used anchoring parts are linear, round and flat, so the plate should be used for anchoring and opening.

2. Construction of stone wall construction of dry method

Dry work is a new technology of central stone wall installation, a wet operation is of good seismic performance, simple operation, construction speed is fast, and reliable in quality and construction is not affected by weather conditions, etc. Directly after it is on the stone plate punching stainless steel (or the coating anticorrosion coating of steel) connecting pieces and buried expansion bolt in the reinforced concrete wall is linked together, SLATE and the main structure formed between 80 ~ 90 cm wide air layer. This method is more than 30 meters of reinforced concrete structure, not suitable for brick wall and gas concrete wall.

Interior wall stone slab dry operation structure: it first plate with bolts and stainless steel wire diameter 4 and connecting structure, finally, with fine linen of alumina cement or gypsum cementing agent wrapped wrapped around the bolt and steel wire, make connections toughened.

The installation of the external wall granite plate is made of expansion bolts and special stainless steel links to connect the plate to the structure.

Supply granite tablets

3. Detailed construction

(1) treatment of yangjiao part:

(2) top of the door and window opening: the upper part of the door and window opening is not easy to be filled with stone panels, and the pasting method shall be used, and the horizontal joint shall be placed on the stone board of the facade. Supply granite tablets

(3) the metope and ceiling handover process: metope and ceiling, with condole top, stone plate into the ceiling shoulds not be too long, the stone plate into 1 cm, and then a 3 cm on the top of the stone mortar fixed keel.

4. Stone wall

5. Material

The stone of the stone that insert wall is decorated with natural stone material and man-made stone cent. Natural stone material mainly has marble and granite two kinds.

Marble texture is fine and fine, hardness is small, easy to process and polish. The polished surface of the marble panel is smooth and clear, with neat edges and corners, beautiful and generous, giving people the feeling of plain and clean. It is mainly applicable to the decoration surface of building.